TCT 2017: BIOTRONIK Symposium Highlights Differing Roles of Drug-Eluting Stents and Magnesium Scaffolds in Clinical Practice

Posted on 31. October 2017 by Firma BIOTRONIK

Data presented at the BIOTRONIK-sponsored symposium on the Orsiro1 drug-eluting stent (DES) demonstrate why Orsiro is gaining prominence in the crowded DES market. In addition, clinical and preclinical data presented about Magmaris2 reinforce the case that the magnesium-based resorbable technology does not share the same risk of acute and late scaffold thrombosis as the controversial Read more about TCT 2017: BIOTRONIK Symposium Highlights Differing Roles of Drug-Eluting Stents and Magnesium Scaffolds in Clinical Practice[…]

Congress Program IERC 2018 Announced

Posted on 31. October 20172. March 2022 by Firma ICM

IERC 2018 is the recycling industry’s most important event, bringing together over 500 international producers, recyclers, equipment manufacturers, recycling associations, standards bodies, refurbishers, NGOs, regulators and many more. Topics Challenges of the Circular Economy Worldwide take-back schemes, quotas and challenges faced by OEMs The role of recycling in the achievement of the sustainable development goals Read more about Congress Program IERC 2018 Announced[…]

Spectrally optimized LumiTop 2700 imaging colorimeter and other innovative LED, SSL and display measurement solutions

Posted on 30. October 20175. May 2022 by Firma Instrument Systems

At Productronica 2017, due to take place in Munich from 14-17 November 2017, Instrument Systems will be presenting a number of innovations in the areas of “Display Production Testing”, “Automotive Interior Measurement” and “End-of-Line Testing in LED Production”. A highlight at the trade fair stand will be the spectrally optimized LumiTop 2700 imaging colorimeter. As a Read more about Spectrally optimized LumiTop 2700 imaging colorimeter and other innovative LED, SSL and display measurement solutions[…]

ProMinent at Aquatech Amsterdam 2017: Vacuum metering system for chlorine gas DULCO®vaq – safe and efficient

Posted on 30. October 20176. February 2018 by Firma ProMinent

ProMinent presents a particularly affordable approach to water treatment on Stand 349 in hall 7 at Aquatech in Amterdam, from 30 October to 03 November 2017: Chlorine gas disinfection. with DULCO®Vaq. The new vacuum metering system for chlorine gas combines maximum safety with maximum efficiency. DULCO®Vaq is designed for disinfection of drinking water, swimming pool Read more about ProMinent at Aquatech Amsterdam 2017: Vacuum metering system for chlorine gas DULCO®vaq – safe and efficient[…]

INDIWO: Perfect Solution for an Optimal Installation

Posted on 30. October 201730. October 2017 by Firma BRUMBERG Leuchten

Until now, many technical details had to be considered when installing lights in insulated false ceilings. In particular, taking distances for thermal balancing into account made the installation of a separate flush-mounting box necessary. With the new INDIWO spot, the Brumberg company from Sundern is taking a completely new path and is offering a combination Read more about INDIWO: Perfect Solution for an Optimal Installation[…]

Ground-breaking ceremony for the Zollhof Tech Incubator – Schaeffler supports start-up center

Posted on 27. October 2017 by Firma Schaeffler

Outstanding ideas, courage, entrepreneurial and team spirit, and opportunities for exchanging information: All of this is brought together in the Zollhof Tech Incubator, which was inaugurated on October 26 in Nuremberg. With financial support from companies like Schaeffler, the incubator gives IT start-ups the opportunity to further develop and implement their ideas, to exchange information, Read more about Ground-breaking ceremony for the Zollhof Tech Incubator – Schaeffler supports start-up center[…]

Pushing boundaries … Third round of the 3D Pioneers Challenge has started!

Posted on 27. October 2017 by Firma Messe Erfurt

. Rapid.Tech + FabCon 3.D 5th -7th June 2018 Messe Erfurt Let’s go for the third round: After the success of the last two years Messe Erfurt organizes again the international Design competition for 3D printing 3D Pioneers Challenge in cooperation with the office for design and consulting d.sign21. Further cooperation partners are associations and Read more about Pushing boundaries … Third round of the 3D Pioneers Challenge has started![…]

At formnext 2017, SLM Solutions Is Presenting SLM 800 and Opportunities for Integrating 3D Printing in Manufacturing Processes

Posted on 27. October 201714. May 2018 by Firma SLM Solutions Group

SLM Solutions Group AG, one of the leading manufacturers of metal-based additive manufacturing technology, has announced the next step in the direction of industrial production using SLM procedures. The Lübeck-based company is presenting technological integration into production processes with the SLM 800 live at its trade fair booth E70 in Hall 3.0 at formnext. SLM Read more about At formnext 2017, SLM Solutions Is Presenting SLM 800 and Opportunities for Integrating 3D Printing in Manufacturing Processes[…]

ArcelorMittal Asturias (Avilés) has contracted SMS group for tailor-made conversion of slab caster No. 2

Posted on 27. October 201725. November 2022 by Firma SMS group

ArcelorMittal Asturias, Avilés, Spain, has contracted SMS group (www.sms-group.com) for a comprehensive conversion of the company’s two-strand slab caster No. 2. With this modernization, ArcelorMittal Asturias responds to the increasingly higher quality demands in the growing market for special steels such as grades for tube and heavy-plate production. The two-strand slab caster No. 2 was Read more about ArcelorMittal Asturias (Avilés) has contracted SMS group for tailor-made conversion of slab caster No. 2[…]

camLine releases LineWorks Recipe Management 6.1

Posted on 27. October 20176. December 2021 by Firma camLine

camLine, a software company specialized in developing solutions for manufacturing excellence, announced the new Release 6.1 of its LineWorks RM recipe management system. It is a connected, IT-based infrastructure solution for the production with the intention to provide the overall and clear evidence of entire manufacturing processes for their unambiguous identification. For comparison, the IDs Read more about camLine releases LineWorks Recipe Management 6.1[…]