Highly efficient, super-flat LED spots in 50mm design

With the MLP series, Signal-Construct GmbH shows once again what is possible with LED spots thanks to optimal resource efficiency.

In addition, there are features such as tool-free installation and special lamps for step lighting with the possibility of installation in standard flush-mounted boxes.

Lighting accounts for over 10% of total electricity consumption per household. Considerable savings can be made in this area, sometimes with little effort and expenses.

E.g. in the MR 16 (Ø 50mm) recessed lamps, the usual 2-pin halogen lamps are still very often used as illuminants. Standard LED products easily lead to energy savings of 80%, which are quite relevant in view of the rising electricity prices.

In the case of new installations, the calculation of the material and energy consumption inevitably includes not only the mere illuminant, but also the additional effort for the installation housing, the socket, possibly the heat sink and terminal block. With a considerable number of lighting solutions, the ecological-economic balance sheet is therefore rather doubtful.

At Signal-Construct, these considerations led to a series of new LED spots, in which minimal use of materials, the use of high-quality components and inexpensive manufacturing processes have resulted in an optimal synthesis of efficiency, low installation effort and intrinsic value.

The new MLP series in particular impresses with its performance data with values ​​that position it in the top group of efficiency-optimized LED lamps. In connection with a special lens optics e.g. a luminous flux of typically 145 lumens / watt (250 lm with power consumption of 1.7 W) is achieved. With a diffuse cover, the values ​​are 90 lm in warm white 3000K and 120 lm in white 4,500K. (Compare Osram Halostar: 375 lm at 20 W, corresponds to 18.8 lm / W). The lifespan of the LED spot of at least 50,000 hours versus 2000 hours of the halogen lamp speaks for itself.

Other advantages are

  • no additional built-in housing necessary
  • all housing materials made of high quality polycarbonate
  • Installation depth only 11 mm
  • Secure hold from a material thickness of 1.5 mm up to solid material
  • Installation opening Ø 53-58 mm
  • Mini weight of 23.5g
  • tool-free assembly
  • wires daisy-chained from one lamp to the next
  • Optionally available for wire connections to be installed on the assembly side (0.3 mm² solid conductor or wire end ferrules) or polarity-proof system cable connection, available in various lengths
  • Maximum service life of at least 50,000 hours thanks to an operating temperature of only approx. 40 ° C
  • Decor ring changeable
  • attractive price / performance ratio

The spots consist of the basic housing with integrated LEDs with optics, designed for an operating voltage of 12 or 24V DC, as well as the snap-on decorative ring on the front, which is available in various surfaces and designs. The scope of delivery generally includes a decorative ring in white.

Due to the low self-heating of a maximum of 40° C, this series is particularly suitable for installation in wooden structures and listed objects, as well as in plastic surfaces, since no discoloration of the materials occurs.

A mounting kit for surface mounting is available for areas of application where there is no possibilty for recessed mounting.
The basic light colors are white (4,500K) and warm white (3,000K). Other luminous colours include blue, green, red and yellow, or color temperatures in the range from 2,200 to 6,500K.

Areas of application:

  • Ceilings
  • Mobile home
  • Solar lighting
  • Furniture
  • Underneath wall cupboards
  • Mirror cabinets
  • For battery and accumulator operation

The program is supplemented by an additional version especially for side installation in stairs, where the spots (installation depth 18mm), including the power supply, can be installed in standard flush-mounted boxes.

Über die Signal-Construct elektro-optische Anzeigen und Systeme GmbH

Signal-Construct has been an innovative owner-managed family company with a focus on the development and manufacture of opto-electronic parts and components for more than 40 years.

The wide range of products offers high-quality, customer-oriented and sustainable solutions for a wide range of applications, whereby a profound know-how is available due to a deliberately high level of vertical integration.

The focus is on illuminations for controls and indicator lights in the industrial and aviation sector, reading lights for rail vehicles as spots or with flexible metal tubing, LED spots for accent lighting, and status indicators for front and PCB installation.

The production program is supplemented by standard and customer-specific light guide components and an area of LED processing, in which the processing of THT-Visible as well as IR and photodiodes or the reworking into SMT-processable components is possible.

Firmenkontakt und Herausgeber der Meldung:

Signal-Construct elektro-optische Anzeigen und Systeme GmbH
Brückenäckerweg 4
75223 Niefern-Öschelbronn
Telefon: +49 (7233) 9531-0
Telefax: +49 (7233) 9531-29

Nils Hofsäss
Telefon: +49 (7233) 9531-19
Fax: +49 (7233) 9531-29
E-Mail: nhofsaess@signal-construct.de
Für die oben stehende Pressemitteilung ist allein der jeweils angegebene Herausgeber (siehe Firmenkontakt oben) verantwortlich. Dieser ist in der Regel auch Urheber des Pressetextes, sowie der angehängten Bild-, Ton-, Video-, Medien- und Informationsmaterialien. Die United News Network GmbH übernimmt keine Haftung für die Korrektheit oder Vollständigkeit der dargestellten Meldung. Auch bei Übertragungsfehlern oder anderen Störungen haftet sie nur im Fall von Vorsatz oder grober Fahrlässigkeit. Die Nutzung von hier archivierten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Eine systematische Speicherung dieser Daten sowie die Verwendung auch von Teilen dieses Datenbankwerks sind nur mit schriftlicher Genehmigung durch die United News Network GmbH gestattet.