Modern Test Method Reveals Potential Savings in Electronics Production:

Manufacturing companies are always looking for savings potential without sacrificing quality. ProMik® has developed Smart ICT to enable just this in the field of industrial production. The core function of Smart ICT replaces a wide range of conventional in-circuit test (ICT) applications. Taken as a whole, the system can contribute to significant cost savings at different levels.

In-circuit testing is still a fixture of a large number of manufacturing processes for electronic components. The test procedure remains indispensable, even if it takes up a lot of time – especially at high cycles. Fluctuating framework conditions, new technologies, and increasing demands pose major challenges for manufacturers of electronic components, but also open up new opportunities. This is what inspired the team of ProMik® GmbH to come up with the Smart ICT principle, which will particularly benefit customers in the automotive industry and industrial automation serviced by ProMik®.

Quality standards of supplied components have increased gradually, and as a result, conventional ICT is no longer strictly necessary to check these in many cases. Applications with compact dimensions and the associated reduction of test pads on the boards (PCBs) represent a major problem. Direct component testing is no longer possible, which will lead to a significant increase in the importance of indirect testing methods in the future.

In view of the global competitive pressures and the steadily decreasing prices of electronic products, the importance of innovative test solutions – and the associated potential for cost savings – might increase for many market players.

When developing the Smart ICT concept, ProMik® focused on precisely these challenges customer face, designing a product that aims at maximizing the savings potential at consistently high quality.

In conventional production flows, programming (flashing) of the components and the subsequent function test take place after ICT. Smart ICT integrates these processes, in addition to flashing. The Smart ICT thus combines a large number of test functions from the ICT and function test process, which can be carried out at the PCB panel level in parallel to initial flashing. This considerably reduces the efforts required for the ICT and function test and consequently significant optimizes the cycle time. Reusable and freely configurable test libraries, flexible control options, and the basic principle of parallel test functions contribute to greater efficiency of the overall process. Separate processes, such as ICT and FCT, can be completely integrated into the flash process in a perspective manner.

Additional functionalities such as boundary scan, field bus communication tests, and microcontroller self-tests expand the test spectrum offered by Smart ICT.

The special property of Smart ICT to map the specific test functions indirectly via the microcontroller, as well as its programming and debug interfaces, makes it particularly interesting for small components, such as key applications with few or no further test pads.

Über die ProMik – Programmiersysteme für die Mikroelektronik GmbH

Sourced by strong collaboration with the semiconductor industry, ProMik is one of the most innovative companies that offers Flash programming solutions for the newest semiconductors well before their market introduction.

Regardless of the market segments, continuous sustainable success can only be achieved by highest quality and reliability. Moreover, in the manufacturing area, programming equipment must offer attributes like fastest programming time (meeting line cycle time), easy installation and handling, conclusive traceability and highest programming quality. Thus, undivided attention is being granted this production process that significantly determines customer’s overall production cost and product quality, short-term and long-term.

Our worldwide customers and partners do value our sophisticated production solutions across a broad range and in many factories around the globe. ProMik’s homogenous programming systems allow far-reaching benefits from reuse of knowledge, time- and money-efficient production moves around the globe and cost-efficient requalification processes. It is ProMik’s continuing determination to guide and support our customers throughout the entire process, from product development to full production, ensuring a seamless plug and play introduction of complex Flash programming solutions.

Firmenkontakt und Herausgeber der Meldung:

ProMik – Programmiersysteme für die Mikroelektronik GmbH
Südwestpark 100
90449 Nürnberg
Telefon: +49 (911) 252665-0
Telefax: +49 (911) 252665-66

Jens Rosenberger
Telefon: +49 (911) 2526650
Für die oben stehende Pressemitteilung ist allein der jeweils angegebene Herausgeber (siehe Firmenkontakt oben) verantwortlich. Dieser ist in der Regel auch Urheber des Pressetextes, sowie der angehängten Bild-, Ton-, Video-, Medien- und Informationsmaterialien. Die United News Network GmbH übernimmt keine Haftung für die Korrektheit oder Vollständigkeit der dargestellten Meldung. Auch bei Übertragungsfehlern oder anderen Störungen haftet sie nur im Fall von Vorsatz oder grober Fahrlässigkeit. Die Nutzung von hier archivierten Informationen zur Eigeninformation und redaktionellen Weiterverarbeitung ist in der Regel kostenfrei. Bitte klären Sie vor einer Weiterverwendung urheberrechtliche Fragen mit dem angegebenen Herausgeber. Eine systematische Speicherung dieser Daten sowie die Verwendung auch von Teilen dieses Datenbankwerks sind nur mit schriftlicher Genehmigung durch die United News Network GmbH gestattet.