Through the agglomeration with ATM briquetting presses, it is possible to form stable briquettes out of aluminous powder without the use of binders. The briquetting process improves the charging capability at the melting furnace and minimizes the dust exposure during the process. Furthermore, the surface to volume ratio of the charge material is reduced which leads to an increase in metal yield.
The briquetting is also suitable for a great number of fine-particle residual materials. This includes swarf out of steel, cast, aluminium, magnesium, brass, copper, bronze and titanium as well as slags, battery waste, tyre wire and mill scale. While briquetting grinding sludge, oils and fluids can also be recovered.
Together with the department of non-ferrous metallurgy of the University of Leoben, ATM Recyclingsystems has been doing research on innovative ways of processing metalliferous residual materials for more than 10 years and has thereby contributed to a reduction of valuable metals which are deprived from the material cycle in the course of deposition.
Arno®Brik briquetting presses are used by customers all over the world to create a sustainable future. More information: https://www.atm-recyclingsystems.com/
ATM stands for Arnold Technology for Metal Recycling based on more than 80 years of experience. The company plans, produces and provides worldwide service support for metal recycling systems for the treatment of secondary raw materials.
ATM Recyclingsystems GmbH
Telefon: +43 (3573) 27527-0
Telefax: +43 (3573) 27527-390