Precise radiation measurement in the UV range

Calibration UV-LEDs of the Instrument Systems ACS series are extremely stable UV sources on LED basis that are traceable to radiant flux. They exhibit an extremely low measurement uncertainty (k=2) of only 4.5% (UVC), 3.5% (UVB) and 2% (UVA) and are available for typical peak wavelengths 280 nm (ACS-570-24), 305 nm (ACS-570-26), and 365 nm Read more about Precise radiation measurement in the UV range[…]

Lasting safety for food production protection

In the food industry, metal detectors are used for quality assurance and to protect against contamination. However, achieving the most accurate detection results requires more than simply using the best technology. Optimal handling and calibration of your metal detection system are of equal importance. In the White Paper “Lasting safety for food production protection“, Sesotec provides five useful tips handling and calibrating metal detectors to ensure their best possible performance and thus guarantee product purity. The White Paper describes the following five Read more about Lasting safety for food production protection[…]

F Interface Calibration Elements

Rosenberger has fundamentally revised its product range of F-interface calibration elements. The outstanding improved characteristics are an extended frequency range from DC to 4 GHz up to DC to 6 GHz and doubling mating cycles from 500 to 1000. The interface standard IEC 61169-24 has been revised due to the distinctively increasing demands in the Read more about F Interface Calibration Elements[…]

Portable process calibrator approved for hazardous areas

WIKA’s CPH7000 portable process calibrator has received ATEX approval. It is therefore also suitable for use in hazardous areas. The CPH7000 provides highly flexible on-site calibration for process transmitters and pressure gauges. A high-pressure version even tests measuring ranges up to 10,000 bar. The portable, multi-function instrument integrates an electronics module, a hand pump for Read more about Portable process calibrator approved for hazardous areas[…]

New Series: RPC-1.35 Connectors

Rosenberger introduces a new precision connector series to meet the increasing demand for proper RF-connections up to 90 GHz. The newly developed RPC-1.35 connector series – the “E connector” – is characterized by a highly robust mechanical design, minimum 3000 mating cycles, high connector repeatability, maximum return loss values and is designed for high-performance RF Read more about New Series: RPC-1.35 Connectors[…]

Diaphragm seal systems with process transmitters: Replacement service optimises the benefit

Operators of diaphragm seal systems with mounted process transmitters can now take advantage of a replacement service. WIKA has put together a service package with which the long-term benefit and the overall costs of such a measuring assembly can be optimised. Diaphragm seal systems often operate under extreme conditions. In the event of a failure Read more about Diaphragm seal systems with process transmitters: Replacement service optimises the benefit[…]

Camera reduces calibration time: LAP upgrades the CAD-PRO laser projection system with the new DTEC-PRO camera system

With DTEC-PRO, LAP introduces a camera system which makes manual calibration during the running production process redundant. This accelerates lay-up processes in the manufacturing of composites. Especially flexible manufacturing such as in the aerospace industry can benefit from this time saving. The modular system design of the LAP DTEC-PRO allows it to be added to Read more about Camera reduces calibration time: LAP upgrades the CAD-PRO laser projection system with the new DTEC-PRO camera system[…]