New test rig components for faster development and validation

Posted on 16. May 201916. May 2019 by Firma Fraunhofer Institut LBF

Numerical simulations have massively accelerated product development over the past few decades. A variety of scenarios can be tested in a short time and the number of necessary prototypes has been steadily reduced. Nevertheless, physical tests are widespread and will not lose significance over the next few decades. Numerical models must be validated and approval Read more about New test rig components for faster development and validation[…]

One-to-one discussion: DVS General Manager Boecking meets Thai Minister of Labour

Posted on 25. April 2019 by Firma DVS Media

On the occasion of the 8th Asia-Pacific IIW International Congress in Bangkok/Thailand on March 20 and 21, Dr.-Ing. Roland Boecking, General Manager of DVS – German Welding Society, met the Thai Minister of Labour, H.E. Police General Adul Sangsingkeo, for a one-to-one discussion. The subject was DVS’s welding technology training system. Dr. Boecking explained to Read more about One-to-one discussion: DVS General Manager Boecking meets Thai Minister of Labour[…]

An exciting 2019 CES

Posted on 10. April 2019 by Firma KECK

In 2019, the CES in Las Vegas once again presented itself as a global meeting place for exceptional technologies. This means that the trade fair is not a consumer trade fair in the usual sense: here, innovative masterminds from the most diverse branches of industry demonstrate what is already possible today. Even for the Canadian-based Read more about An exciting 2019 CES[…]

Intelligently linked engineering solutions

Posted on 29. March 2019 by Firma Baumüller

Baumüller will present its Engineering Framework ProMaster at the Hannover Messe, which contains a library concept: In addition to the base library with motion modules as per PLCopen, Baumüller offers a constantly-growing library of specific modules as well as machine modules with comprehensive functionalities for quick and easy engineering. Each machine module is tailored to Read more about Intelligently linked engineering solutions[…]

Premium Solutions Worldwide – experience PFEIFER at the bauma

Posted on 26. March 2019 by Firma PFEIFER Holding

Only two weeks till the bauma 2019 starts in Munich. Discover the breadth and depth of our group performance capabilities, all in one spot. Immerse yourself in the world of PFEIFER. Learn more about the range of our products and our most recent innovations at our digital information boards. Experience our exhibits and gain first Read more about Premium Solutions Worldwide – experience PFEIFER at the bauma[…]

Yxlon and Japanese Nagoya Electric Works announce collaboration for the Semicon Industry

Posted on 21. March 2019 by Firma YXLON International

YXLON International, a division of the Swiss Comet Group, have today announced a collaboration with the Japanese company Nagoya Electric Works (NEW). The collaboration includes the development and distribution of specialized X-ray systems for the semiconductor industry. Both companies, YXLON and NEW, are leaders in advanced Electronics X-ray technology. Yxlon bring their expertise in high-resolution Read more about Yxlon and Japanese Nagoya Electric Works announce collaboration for the Semicon Industry[…]

Süd-West-Chemie focusses on sustainability and saving resources

Posted on 11. March 2019 by Firma Süd-West-Chemie

The conservation of resources and protection of the environment is growing increasingly more important in many fields of industry. The same applies to Süd-West-Chemie GmbH. The Swabian chemicals company seeks to contribute to environmental protection through investments as well as the use of more sustainable products and raw materials. A new development to replace hazardous Read more about Süd-West-Chemie focusses on sustainability and saving resources[…]

Calculation concept shortens the design process of injection molded parts

Posted on 26. February 201916. May 2019 by Firma Fraunhofer Institut LBF

Using a new calculation process, it is now possible to predict fiber orientation-dependent component behavior in relation to shaped elements at an early stage and thus design the component in accordance with the expected load. This reduces costly iteration cycles and thereby shortens the entire development and manufacturing process. What is more, the concept can Read more about Calculation concept shortens the design process of injection molded parts[…]

Digital goods flowing from the RFID gate directly into the cloud

Posted on 8. February 2019 by

At this year’s LogiMAT trade fair (February 19 to 21, 2019 in Stuttgart, Germany), the HARTING Technology Group will be at the AIM joint stand (Hall 4, Stand D05) demonstrating how effective it is to automate the flow of goods with state-of-the-art UHF RFID technology. The GateToGo is a mobile data entry portal (gate) that Read more about Digital goods flowing from the RFID gate directly into the cloud[…]

KEMPER is growing: 2018 has been the most successful year in the company’s history

Posted on 5. February 2019 by Firma KEMPER

KEMPER GmbH continues on its growth course. 2018 became the most successful financial year in the company’s history. For the first time, the manufacturer of extraction units and filter systems surpassed the sales mark of 40 million euros. KEMPER boosted sales of central filter systems by more than 25 percent compared to 2017. With the Read more about KEMPER is growing: 2018 has been the most successful year in the company’s history[…]