Press releases worldwide
Bellows couplings are used to connect two shaft journals, for example the motor and gear of a drive unit. They have to be torsionally rigid, flexible, easy to assemble, economical, precise and very resilient. The bellow couplings with internal teeth […]
The current model of the mechanical power clamping nut MDA combines the simplest, manual operation at low tightening torques with the highest clamping forces. The interior can multiply the manual tightening torque by means of a robust gear transmission with […]
In order to meet the ever increasing demands for higher performance, JAKOB Antriebstechnik offers the metal bellows coupling KPP. Its rated torque is above 600 Nm and the maximum torque at approx.1200 Nm. It has to withstand operating speeds of […]
JAKOB Antriebstechnik now offers five stainless steel couplings as standard series. The metal bellows couplings KG-VA, KGH-VA and MKG-VA, the spacer coupling series WD-VA and the elastomer coupling EKM-VA. Both the KGH-VA metal bellows coupling and the WD-VA series are […]
With the SKR series, JAKOB Antriebstechnik has a newly developed safety coupling for indirect drives in its portfolio. Due to its optimal pulley integration, it offers a small distance between the belt pulley and the bearing seat of the drive. […]
The hydromechanical spring-loaded cylinders of the ZSF series from JAKOB Antriebstechnik offer robust and reliable clamping elements. These spring-loaded systems can be used wherever displaceable or movable machine parts must be temporarily clamped or locked. Other applications can be found […]
With the MCA power clamping nut from JAKOB Antriebstechnik, the user has at his disposal a long-proven, widely used and economical clamping element. Without additional installation effort, this clamping technology can ensure the highest clamping forces and maximum operational reliability […]
Workpieces up to approx. 50cm are usually mechanically and manually clamped with three- or four-jaw chucks, or automatically by pneumatic or hydraulic. If, however, the workpieces to be machined are larger, then planar disks are used. They also hold much […]
With the new KG-HS coupling series, JAKOB Antriebstechnik offers a high-speed version of the popular KG metal bellows coupling. Assembly and disassembly are no longer difficult, even in cramped installation conditions. The rotationally symmetrical clamping hub ensures optimum balancing quality, […]
Increasing efficiency through automated set-up processes: Due to a sharp increase in the variety of products, modern press shops are now more than ever faced with the challenge of carrying out tool changes or system set-ups as smoothly as possible. […]