Press releases worldwide
The compact metal bellows coupling KGE is a tailor-made solution for all gearboxes with a drive flange (DIN-EN-ISO 9409–1). This system unit is particularly impressive due to its particularly short design with maximum utilization of the rigidity of the gearbox. […]
The SKW safety coupling provides reliable overload and collision protection. It comes with a cost-effective keyway connection and an integrated deep groove ball bearing for high bearing forces. Made from tempered steel, it can be used in temperature ranges from […]
The clamping nuts of the MCA-S and MCA-T series are an advancement of the proven MCA series. To enhance user-friendliness, the traditional hexagon design has been supplemented with a star or T-handle, allowing for easy operation by hand without additional […]
Efficient new investments with added value New investments should be "worth it" in the long term – be it through easier and faster handling during setup, through the reduction of potential hazards or more ergonomic workplace designs. Longer tool […]
With the MDR series, JAKOB Antriebstechnik has a universally applicable power clamping nut with a lateral operating hexagon and through-hole thread in its range. The MDR series supplements the two clamping nut types MCA and MDA with operation from above, […]
The SKR series is the latest safety coupling for indirect drives in the JAKOB Antriebstechnik product range. Thanks to optimal disk integration, the distance between the pulley and the bearing seat of the drive is minimized. This reduces the forces […]
When do you need a servo coupling? A coupling initially connects two shaft journals. However, even a minimal misalignment of the shafts or fluctuations in the ambient temperature can lead to uneven running, which is reflected in increased wear […]
The smallest representative of the servo compensating couplings, the miniature couplings, are designed to compensate for the misalignment or an axial displacement of two axes or shafts. Depending on the design, they are used in different areas such as tachometers, […]
Bellows couplings are used to connect two shaft journals, for example the motor and gearbox of a drive unit. They must be torsionally rigid, flexible, easy to install, economical, precise and very resilient. The bellows couplings with internal gearing from […]
JAKOB Antriebstechnik GmbH offers five different stainless steel couplings as standard series: the metal bellows couplings KG-VA, KGH-VA and MKG-VA, the distance coupling series WD-VA and the elastomer coupling EKM-VA. It is particularly noteworthy that both the metal bellows coupling […]