The metal bellows coupling of the KP series is characterized by its short design and a 4-wave bellows with two radial clamping hubs. This compact design is ideal for applications with minimal shaft spacing and limited space. The high torsional […]
Author: Firma JAKOB Antriebstechnik
Power clamping nut MDA multiplies tightening torque
Posted on Posted in General
The current model of the mechanical power clamping nut MDA combines the simplest, manual operation at low tightening torques with the highest clamping forces. The interior can multiply the manual tightening torque by means of a robust gear transmission with […]
Metal Bellows Coupling KPP for High-Speed Applications
Posted on Posted in General
To meet the demands of higher performance applications, JAKOB Antriebstechnik offers the KPP metal bellows coupling. This coupling has a nominal torque of over 600 Nm and a maximum torque of approximately 1200 Nm. It is designed to handle operating […]
ZSF hydromechanical spring tensioner increases safety
Posted on Posted in General
The hydromechanical spring clamping cylinders ZSF from JAKOB Antriebstechnik are robust and reliable clamping mechanisms for various areas of application. They are ideal for situations in which moving machine parts need to be temporarily fixed, such as in fixture construction […]
Maximum insulation for cryogenic gases
Posted on Posted in General
Modern cryogenic containers are true masters of insulation. The secret lies in the highly complex double-wall technology, specifically designed for the storage and transport of cryogenic, liquefied gases such as nitrogen, oxygen, argon, or helium. To reduce heat input to […]
MCA Power Clamping Nut – Durable and economical
Posted on Posted in General
With the MCA power clamping nut from JAKOB Antriebstechnik, the user has at his disposal a long-proven, widely used and economical clamping element. Without additional installation effort, this clamping technology can ensure the highest clamping forces and maximum operational reliability […]
MSPD power clamping spindle with automatic changeover
Posted on Posted in General
Workpieces measuring up to approximately 50cm are typically clamped manually and mechanically using three- or four-jaw chucks, or automatically through pneumatic or hydraulic means. However, when dealing with larger workpieces, planar disks come into play. These disks securely hold much […]
High-Speed with KG-HS
Posted on Posted in General
With the KG-HS coupling series, JAKOB Antriebstechnik offers a high-speed version of the popular KG metal bellows coupling. It is manufactured with clamping hubs in a splitted hub design on both sides. Assembly and disassembly are no longer difficult, even […]
Safety coupling SKB-KP
Posted on Posted in General
The tried-and-tested SKB-KP series safety coupling has been used for decades to provide mechanical protection for drive units. It has already proven its effectiveness in hundreds of applications, especially when used as collision protection in the feed axes of machine […]
For the big moves
Posted on Posted in General
Safe and accurate transmission of torques is essential for precision drives of cross cutters. This is ensured by the use of steel bellows couplings with force-fitted shaft-hub connection. The metal bellows couplings of the KXL series from JAKOB Antriebstechnik GmbH […]